Fantasy Skirmish WargameEst. 2001

Middle-earth Strategy Battle Game Scale for 3D Printing

MESBG spans two sculpt generations — older metal Lord of the Rings figures closer to 25mm and newer plastic kits at 28mm. Because both sizes play together, the hobby accepts the gap, which means you have some freedom when scaling proxies as long as you pick a baseline and stay consistent.

Skip to content

What scale am I actually printing?

Miniature Scale
28mm
Ratio Equivalent
1:56
Measurement
eye level
Eye Level Height
28.0mm

MESBG occupies a unique position — older metal miniatures from the original Lord of the Rings range measure closer to 25mm, while newer plastic releases are 28mm. Both are used in the same game, and the size difference is accepted as part of the range's history.

Publisher: Games Workshop·Base Sizes: 20mm, 25mm, 40mm, 50mm, 60mm, 80mm

For heroes based on film actors, proportions matter more than any other game I print for. A 14% scale error on a recognizable face is jarring in a way it never is on an armored space marine. I measure the eyes carefully and favour a 0.2mm nozzle so the likeness survives scaling.

One quirk I hit repeatedly: metal MESBG miniatures run thinner than plastic and printed alternatives. When I replace a metal hero with a printed one I add about 3% rather than scale to the raw figure height, so the new model reads the same on the table.

Deep Dive: 25mm metals and 28mm plastics in one army

MESBG is the one mainstream game where 25mm and 28mm miniatures fight side by side on purpose. Printing a proxy to fit means deciding which generation of the range you are matching before you touch the slicer.

The Two Scales in One Range

Older metal miniatures from the original Lord of the Rings range measure closer to 25mm, while the newer plastic releases are 28mm. Both are legal in the same army, and the community has accepted the size difference as part of the range's history. Hobbits and Goblins are intentionally smaller than Men — that is proportion, not inconsistency.

That means your anchor is whatever generation dominates your collection, not a universal number.

Pick Your Anchor

If your force is mostly modern plastic, anchor at 28mm. If it is mostly classic metal, you will end up closer to 25mm in practice. The validated 28mm lane references that bracket the modern GW side are still my sanity check:

Conversion Formula Slicer %
MESBG (28mm) → Modern GW (32mm)32 ÷ 28114.3%
Modern GW (32mm) → MESBG (28mm)28 ÷ 3287.5%

Film-Accurate Proportions

MESBG miniatures use realistic proportions, not heroic exaggeration — heads and hands are smaller than a GW model of the same height. When I print a proxy of a named character, faces matter because they are based on actors. I run a 0.2mm nozzle at 0.06mm layers and put supports on the back and undersides so nothing touches the face.

The metal range is thinner than the plastics, so a printed replacement often looks right without adding bulk. Compare the torso width, not just the height, when you are deciding whether a proxy matches.

Vehicles and Display Pieces

Two validated steps are useful for MESBG side projects: 163.2% takes a 28mm model into the 1:35 model-kit lane for vehicles and terrain displays, and 267.9% pushes a favorite hero all the way to display scale for the cabinet.

Common MESBG Mistakes

  • Scaling to 32mm by accident. A 114.3% up-scale is right for matching modern GW, not for matching a MESBG collection anchored at 28mm.
  • Trusting a "25mm" label on a modern proxy. Check the eye level in the slicer against the metal miniature you are replacing.
  • Skipping facial detail on named characters. This is the one range where recognizable faces carry the game.

Scale Conversions for MESBG

Slicer percentages for converting between Middle-earth Strategy Battle Game and other common miniature scales.

Scale conversions for MESBG
ConversionDescriptionSlicer %
28mm → 32mmMESBG to Modern GW Scale114.3%
32mm → 28mmModern GW to MESBG Scale87.5%
28mm → 1:35MESBG to Model Kit Scale163.2%
28mm → 75mmTabletop to Display267.9%

Printing these minis on FDM

Facing accuracy is the priority, so I use a 0.2mm nozzle at 0.06mm layers for named characters. Rank-and-file warriors print fine at 0.4mm and 0.08mm. Always verify the eye line after scaling — it is the whole game for this range.

All settings tested on my Bambu Lab A1 Mini with PLA. Your printer may want something different — always print a test piece first.

Frequently Asked Questions

What scale is Middle-earth Strategy Battle Game?
MESBG is 28mm scale for modern plastic kits, with older metal minis closer to 25mm. Both are played together.
How much should I scale a 3D printed film-accurate hero?
Start from a 28mm eye line, then add roughly 3% when replacing a thin metal sculpt with a printed one so it reads the same on the table.

Middle-earth Strategy Battle Game and all related names, ranges, and units are trademarks of Games Workshop. STLACCESS is an independent hobby project — not affiliated with, endorsed by, or sponsored by any game manufacturer or publisher. Names appear only to identify miniature scales and printing settings; no branded files, models, or artwork are hosted here.Full trademark notice

Time to check the scale before you commit to a long print.

Launch the STL scale calculator