Fantasy/Sci-fi Skirmish WargameEst. 2014

Frostgrave & Stargrave Miniature Scale for 3D Printing

Frostgrave and Stargrave both run at 28mm true scale, and their warbands are built from whatever modular kits you own. That mixing is the whole point — and it is exactly why scaling your 3D prints to a single 28mm baseline makes the warband cohere.

Skip to content

What scale am I actually printing?

Miniature Scale
28mm
Ratio Equivalent
1:56
Measurement
eye level
Eye Level Height
28.0mm

Frostgrave official miniatures (produced by Warlord Games) are 28mm true scale. The game is explicitly miniature-agnostic, so any 28mm or 32mm miniatures work. Stargrave leans toward 28mm sci-fi but accepts the same range. This flexibility makes both games a natural fit for 3D printed collections.

Publisher: Osprey Games / Warlord Games·Base Sizes: 25mm, 40mm, 50mm

Because the games encourage mixing ranges and sculptors, the worst enemy is a 30mm model parked next to a 28mm one. I scale every printed piece to a strict 28mm eye line so whatever I add to the warband blends with what I already own. The consistency is what sells the group.

Frostgrave's spellcasters and Stargrave's crew both have a lot of small handheld objects — spell effects, blades, gear. These need a fine profile to avoid softening, so I treat infantry detail like the hero models in other games.

Deep Dive: Miniature-agnostic and printing-friendly

Frostgrave and Stargrave have no locked range — any 28mm or 32mm miniature works. For a printer that is the best possible ruleset, as long as you keep each warband internally consistent.

The 'Any Miniature' Rule

The official Frostgrave miniatures (produced by Warlord Games) are 28mm true scale, but the game is explicitly miniature-agnostic — any 28mm or 32mm miniatures work. Stargrave leans toward 28mm sci-fi but accepts the same range. That flexibility makes both games a natural fit for a 3D printed collection.

Pick an Anchor and Stay Consistent

The only real rule is internal consistency. Pick 28mm or 32mm for a warband and hold it across every model in the group. The validated step between the lanes is:

Conversion Formula Slicer %
Frostgrave (28mm) → Modern (32mm)32 ÷ 28114.3%
Modern (32mm) → Frostgrave (28mm)28 ÷ 3287.5%

What to Print

This is one of the best games for 3D printing experimentation. I print warbands in batches at 0.4mm nozzle and 0.08mm layers for playability, and save the 0.2mm nozzle at 0.06mm for wizards and named characters. Terrain is half the game — frozen ruins for Frostgrave, sci-fi corridors for Stargrave — and it prints great on FDM at 0.1mm layers.

Mixing Ranges

If you want to pull in a Legion or MCP miniature as a guest star, the validated step up from the 28mm lane is 125.0%. That lands the model in the 35mm lane alongside them rather than trying to squeeze a bigger sculpt down to your warband's scale.

Common Frostgrave Mistakes

  • Mixing 25mm metals with 32mm STLs in one warband. Each warband should look like it came from the same place — pick one lane and stick to it.
  • Spending hours on a rank-and-file thug. Playability models read fine at 0.08mm layers. Reserve the fine detail for wizards and captains.
  • Skipping terrain. Frostgrave and Stargrave are terrain games. The board sells the theme more than any single model.

Scale Conversions for Frostgrave

Slicer percentages for converting between Frostgrave & Stargrave and other common miniature scales.

Scale conversions for Frostgrave
ConversionDescriptionSlicer %
28mm → 32mmFrostgrave to Modern Scale114.3%
32mm → 28mmModern Scale to Frostgrave87.5%
28mm → 35mmClassic to Legion/MCP125.0%
28mm → 1:35Tabletop to Model Kit163.2%

Printing these minis on FDM

Keep every print at a 28mm baseline for a coherent mixed warband. Use a 0.2mm nozzle at 0.06mm layers for wizards, crew leaders, and handheld detail; 0.4mm at 0.08mm works for rank-and-file.

All settings tested on my Bambu Lab A1 Mini with PLA. Your printer may want something different — always print a test piece first.

Frequently Asked Questions

What scale are Frostgrave and Stargrave?
Both are 28mm true scale and are designed to be built from mixed miniature ranges.
Why do my modular warband pieces look uneven?
Different sculptors drift from 28mm. Scale every printed piece to a strict 28mm eye line so the mixed warband coheres.

Frostgrave & Stargrave and all related names, ranges, and units are trademarks of Osprey Games / Warlord Games. STLACCESS is an independent hobby project — not affiliated with, endorsed by, or sponsored by any game manufacturer or publisher. Names appear only to identify miniature scales and printing settings; no branded files, models, or artwork are hosted here.Full trademark notice

Time to check the scale before you commit to a long print.

Launch the STL scale calculator