Historical Wargame (WWII)Est. 2012

Bolt Action Miniature Scale for 3D Printing

Bolt Action pairs 28mm true-scale infantry with 1:56 vehicles, and this is where the famous 1:48 confusion lives. On paper the vehicle scale is 1:56, but in practice many players run Tamiya 1:48 kits because modern plastic infantry have crept larger and the bulkier hulls look right alongside them.

Skip to content

What scale am I actually printing?

Miniature Scale
28mm
Ratio Equivalent
1:56
Measurement
eye level
Eye Level Height
28.0mm

Bolt Action uses 28mm true scale — realistic human proportions with no heroic exaggeration. A standard infantryman measures 28mm from foot to eye level. Vehicle scale is 1:56, which aligns naturally with 28mm miniatures. Historical accuracy matters more here than in fantasy games.

Publisher: Warlord Games·Base Sizes: 25mm, 40mm, 60mm, 80mm, 100mm

I split my Bolt Action prints into two jobs. Infantry get scaled to a strict 28mm true-scale eye line. Vehicles I scale to look correct under my infantry's geometry — and that often means 1:48 rather than 1:56, because squinting soldier proportions demand a beefier hull.

The math is easy per figure, but the look is decided by the pair. I hang a test vehicle next to an infantry model before printing a motor pool. Numbers get you 90% of the way; the last 10% is eyeballing articulation and hull height, which no formula replaces.

Deep Dive: The 1:56 vehicle scale, explained

Bolt Action infantry are 28mm true scale, but the vehicles are a separate 1:56 ratio. Here is how the two pair up and what it means for your slicer.

What Scale Is Bolt Action?

Bolt Action infantry are 28mm true scale, measured to the eyes (160cm on a 175cm human baseline). This is the same convention used by older Warhammer 40k Firstborn models, D&D miniatures, and most historical wargaming ranges.

The vehicle scale for Bolt Action is 1:56. This ratio means that 1 millimetre on the model equals 56 millimetres in real life. A 3-metre-tall Sherman tank should measure approximately 53.5mm on the tabletop.

Why 1:56 Works with 28mm Infantry

The 1:56 vehicle scale is paired with 28mm infantry because both use the same reference point. A 175cm human in 1:56 scale is approximately 31.25mm tall to the top of the head, which puts the eye level at about 28mm. The math lines up.

FDM Settings for Bolt Action Miniatures

Component Nozzle Layer Height Notes
Infantry (rank and file)0.4mm0.1mmGood enough for tabletop. Bayonets may soften.
Infantry (characters/officers)0.2mm0.06mmBetter facial detail, cleaner rifle barrels
Vehicles (tanks/trucks)0.4mm0.2mmPrint fast, detail holds well at this scale
Terrain (buildings/walls)0.4mm0.2mmUse grid infill for strength

Converting Non-28mm STLs for Bolt Action

Most vehicle STL files are designed for 1:35 scale (traditional model kits). Here is how to convert them:

Source Scale Target Scale Slicer %
1:35 vehicle1:56 vehicle62.5%
1:48 vehicle1:56 vehicle85.9%
1:72 vehicle1:56 vehicle128.6%
32mm infantry28mm infantry87.5%
35mm infantry28mm infantry80.0%

Common Bolt Action Printing Mistakes

  • Printing vehicles at 100% when they are designed for 1:35. A 1:35 tank printed at full size will be nearly twice as long as it should be next to your 28mm infantry. Always check the STL description for the intended scale.
  • Scaling infantry by total height instead of eye level. A model with a raised arm or tall helmet will have a misleading bounding box. Measure from the foot contact point to the eyes, use that as your reference dimension.
  • Using 100% infill on vehicles. Most Bolt Action vehicles are hollow in the real kit. For 3D prints, use 15-20% grid infill. It saves filament and the model will still be durable enough for regular handling.

Scale Conversions for Bolt Action

Slicer percentages for converting between Bolt Action and other common miniature scales.

Scale conversions for Bolt Action
ConversionDescriptionSlicer %
28mm → 1:35Infantry to Model Kit Vehicle163.2%
1:35 → 28mmModel Kit to Tabletop61.3%
1:56 → 28mmBolt Action Vehicle Scale97.9%
28mm → 32mmTabletop to Heroic Scale114.3%

Printing these minis on FDM

Rank-and-file infantry print at a 0.4mm nozzle and 0.1mm layers; officers and snipers get 0.06mm on a 0.2mm nozzle. Vehicles print fast and clean at 0.2mm layers. Bayonets and rifle barrels soften on FDM, so I orient those parts carefully.

All settings tested on my Bambu Lab A1 Mini with PLA. Your printer may want something different — always print a test piece first.

Frequently Asked Questions

Is Bolt Action 28mm or 1:56?
Both. Infantry are 28mm true scale to the eyes, and the official vehicle scale is 1:56. Many players prefer 1:48 Tamiya kits because they look correct next to bulkier modern plastic infantry.
How do I bring a 1:35 vehicle STL down for Bolt Action?
Scale a 1:35 vehicle to 62.5% to reach 1:56. If you target 1:48 instead, use a smaller reduction so the hull lands in the 1:48 sweet spot.

Bolt Action and all related names, ranges, and units are trademarks of Warlord Games. STLACCESS is an independent hobby project — not affiliated with, endorsed by, or sponsored by any game manufacturer or publisher. Names appear only to identify miniature scales and printing settings; no branded files, models, or artwork are hosted here.Full trademark notice

Time to check the scale before you commit to a long print.

Launch the STL scale calculator