STL Scale Reference Bar Generator

Another tool I built because I needed it myself

The tool behind those 'cubes to import into lychee for scaling' searches. Pick a scale and a bar length, and I generate an STL ruler bar you can download instantly. It has 5mm tick marks along its length plus an end tab exactly as tall as a figure at that scale. Import it next to any model of unknown scale, measure the model against the ruler in your slicer, and you instantly know what percentage to type in. Generated in your browser — nothing uploaded.

Skip to content

Features

Downloadable STL, generated in your browser
All 16 tabletop scales supported
5mm tick marks plus a figure-height end tab
Ruler lengths from 30 to 100mm
No uploads, no accounts, no cookies

Generator

What you get

A 50mm ruler bar with 5mm ticks and a 32.0mm eye-level end tab. Import it into Lychee or Chitubox and measure your STL against the ticks.

How to use it: import the STL next to your model in Lychee or Chitubox, then measure the model's height in millimetres against the ruler ticks. Match a figure's eye level to the end tab — or just read the ticks directly — then let the Scale Identifier name it and head to the scale engine to work out your percentage. The STL is generated entirely in your browser and never touches a server.

Direct answer

What the reference bar does

It's a printable ruler with 5mm tick marks and an end tab that's exactly a figure's height at your chosen scale. Import it into Lychee or Chitubox next to a model of unknown scale, read the model's height off the ticks, and you instantly know what percentage to scale it to any game. Everything generates in your browser — nothing is uploaded.

Figure Heights at Every Supported Scale

ScaleTypeStandard MeasurementTop of Head
6mmgaming6.0mm6.5mm
8mmgaming8.0mm8.8mm
10mmgaming10.0mm10.9mm
15mmgaming15.0mm16.3mm
1:100ratio17.5mm17.5mm
1:72ratio24.3mm24.3mm
28mmgaming28.0mm30.5mm
30mmgaming30.0mm32.8mm
1:56ratio31.3mm31.3mm
32mmgaming32.0mm34.5mm
35mmgaming35.0mm38.0mm
1:48ratio36.5mm36.5mm
40mmgaming40.0mm43.0mm
1:35ratio50.0mm50.0mm
1:27ratio64.8mm64.8mm
75mmdisplay75.0mm80.0mm

The "Standard Measurement" column is the height the end tab uses: eye level for gaming and display scales, top of head for ratio scales — the same 175cm baseline as the rest of the site.

How to identify a model's scale with the bar

  1. 1

    Download the bar at any scale

    Pick your scale and bar length, then hit generate. The STL is built in your browser and downloads instantly — no account, no upload.

  2. 2

    Import it next to your unknown model

    In Lychee or Chitubox, drop both STLs on the plate. Read the model's height in millimetres against the 5mm ticks, or stand the model beside the end tab to compare against a known figure height.

  3. 3

    Name the scale and convert it

    Feed your measurement into the Scale Identifier to name the scale, then head to the scale engine for the exact percentage into any game.

Reference Bar FAQ

How do I use the reference bar in Lychee or Chitubox?

Import the STL bar next to your model of unknown scale, then measure the model's height against the 5mm tick marks. Match a figure's eye level to the end tab — or just read the ticks directly — and you have the height in millimetres.

What is the end tab on the bar for?

The end tab is exactly as tall as a figure at your chosen scale, measured to eye level. Stand it next to an infantry model and if the model lines up with the tab, it matches that scale.

Why can't I tell the scale from the STL file itself?

STL files store geometry without units — no inches, millimetres, or scale label. Your slicer assumes millimetres, which is why an unknown file can come out any size. Measuring the imported model against the bar is the reliable fix.

What percentage do I type after I measure my model?

Once you know the model's height, use the Miniature Scale Identifier to name the scale, then open the Scale Calculator for the exact percentage between your source and target scales. This tool is step one of that chain.

Why doesn't my model match any scale cleanly?

Heroic-proportioned sculpts, creatures, and models between two standards often sit off the classic numbers. Treat a match within about 5% as strong, and anything further out as a sign the sculpt is stylised rather than strict.

Which bar length should I download?

50mm covers most infantry and vehicle work. Pick 30mm for small epic-scale models, and 75-100mm if you are measuring terrain, large monsters, or 75mm display pieces.